COC of Algeria

Certificate of conformity of Algerian product conformity assessment scheme, the official name of which is certififcat de conformate (certificate de control de quality des marchendies)。   

<!--[if !supportLists]-->·         <!--[endif]-->The primary objectives of the plan are:

<!--[if !supportLists]-->·         <!--[endif]-->1、Ensure that the product complies with the technical regulations and mandatory standards (or their equivalent) applicable to Algeria.

<!--[if !supportLists]-->·         <!--[endif]-->2、Ensure Algerian consumers' requirements on product quality, health and safety, environmental protection, etc.

<!--[if !supportLists]-->·         <!--[endif]-->3. Prevent unqualified and counterfeit goods from entering Algeria.

Information to be submitted

<!--[if !supportLists]-->·         <!--[endif]-->Test report

<!--[if !supportLists]-->·         <!--[endif]-->Packing list

<!--[if !supportLists]-->·         <!--[endif]-->INVOICE

<!--[if !supportLists]-->·         <!--[endif]-->Application form

<!--[if !supportLists]-->·         <!--[endif]-->L/C copy

<!--[if !supportLists]-->·         <!--[endif]-->certificate of authorization

 manufacturer's guarantee 

COC certification process in Algeria

Product testing - submission of inspection application data - Evaluation and review data of issuing organization - issuance of charge notice - payment by applicant - submission of payment water sheet to issuing company - issuance of inspection notice - appointment of inspection time and place - on-site inspection - Evaluation and inspection report - Notification of inspection results to exporter - provision of final packing list and invoice to exporter Issuing center - issue draft Certificate - exporter's confirmation certificate content - issue COC certificate

Algeria COC certification label requirements

According to the specific requirements of different product standards, the following information shall also be displayed clearly and not easily removed:

Manufacturer's name and address; product name; product model / specification; origin identification; batch / batch number; manufacturing date; best use period; net content; active ingredient content; active ingredient list; electrical appliance category; electrical parameters; size; fiber content and proportion; condition requirements; storage conditions; preventive measures; use instructions 

Algeria COC certification inspection requirements

1. Product appearance (the key is whether the product has rust, burr, burr and defect)

2. Product label (key points are: whether there are product name, model, make in China, trademark, exporter or manufacturer's name on the label, electrical and electronic products also have voltage, frequency, power, current and other parameters)

3. Packing mark (key points are: whether the packing box is made in China, product name, model or specification, trademark, exporter or manufacturer's name, electrical and electronic products should also have voltage, frequency, power, current and other parameters, such as gross weight, net weight, rain proof mark, handle the mark with care, etc.)

4. If it's a label with stickers, they will roughly check the firmness of the label. As long as it's not too outrageous or too bad, there is usually no big problem. I'm afraid that I didn't tip. The inspector picked the bone from the egg and pulled it down hard, which is the most common case. Because there is no standard for this fastness, it has the final say by the inspector.

5. the problem of gross weight and net weight. Some inspectors with older qualifications don 't care too much about this aspect, because the error of this thing is really normal, and the deviation of gross weight and net weight is a little bit, which is not closely related to the product quality. But for novice inspectors, they need to be more accurate, a little bit different, all of them need to be accurate. So these enterprises should cooperate well

6. After checking the above items, if there is no problem, the inspector will take part of the boxes for spot inspection according to the total number of boxes, such as counting the product quantity in the box and multiplying it by the actual number of boxes to see whether the actual quantity is consistent with the box list and invoice

7. After checking the quantity, if there is no problem, the inspector shall take photos of the goods for evidence.